Plast UV - Plast PEUV - ( Polyethylene )

Special U.V. masterbatches based on hindered amine stabilizers (HALS) with PE  resins as carrier. All polyolefin’s HDPE, LDPE, LLDPE, PP products in outdoor applications are exposed to UV solar radiations, the energy of this radiation is sufficient to initiate photochemical radiations leading to degradation. In the absence of UV stabilizers polyolefin  products have poor stability. the practical consequences of unchecked exposure to UV radiations are discoloration, surface crazing, and formation of surface micro cracks, embitterment and loss of mechanical properties- tensile strength, elongation and impact strength.  Plast UV Stabilised grade avoid photochemical oxidation by UV radiation which causes fine cracks in the material, applicable in food grade and non-food grade products.

These UV masterbatches can be used in the manufacture of  Jumbo bags(FIBCS) Big Bags, Tarpaulins, Green house films, Garden nets, blow & injection moulded  PE  based Products, rotomolded tanks, PE drums thin walled products, films etc.

The recommended rate of addition is 1.0-5.0 % with polymer by weight. Loading product is dependent on machine and climatic conditions. There is no reduction in UV stability of the final product when added with any other PLAST Masterbatches. Our active content of UV stabilizers is 10% and 20% HALS UV concentrate masterbatches in PE and PP Carrier with food grade & non-food grade approval.